311.620 Fundamentals of Manufacturing Engineering
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2021W, VO, 2.0h, 3.0EC
TUWEL

Properties

  • Semester hours: 2.0
  • Credits: 3.0
  • Type: VO Lecture
  • Format: Presence

Learning outcomes

After successful completion of the course, students are able to

-  describe essential manufacturing processes according to DIN 8580

-  draw sand moulds, patterns and core boxes for a given workpiece

-  calculate machining time for drilling and turning operations

-  calculate power requirements for drilling and turning operations

-  denominate cutting materials and their essential characteristics

-  describe cutting tools and their characteristics

Subject of course

This lecture covers the fundamentals of manufacturing methods such as casting, forming, cutting, joining, and coating.

Teaching methods

Lectures will be used to introduce and explain manufacturing methods and demonstrate their application by use of videos

Regulation for the winter semester 2021:

Ladies and gentlemen,

first of all, I would like to welcome you to the TU Wien. The course is basically held in classroom teaching. However, because of the current situation regarding COVID-19 the lecture hall capacities are limited (seats must be kept vacant), the classroom course is held in the lecture hall Freihaus FH1 in a 14-day rhythm. For this purpose, 2 groups (cohorts) are formed:

Cohort A: For all students whose name begins with an initial letter between A and M. Lecture takes place in the odd weeks, starting with the date 07.10.2021.

Cohort B: For all students whose name begins with an initial letter between N and Z. Lecture takes place in the even weeks, starting with the date 14.10.2021.

In addition, you can follow the livestram via the TUWEL course (applies to the dates you are not present in the lecture hall, or if you belong to a risk group, live in the household with members of a risk group, etc.). Please register for the TUWEL course in the TISS and register for one of the two groups (cohort A or B), corresponding to the initial letter of your name, and then visit the lecture hall for the dates planned for your group (cohort).

If you follow the LVA via livestream and have questions, please use the forum "Questions about the lecture material" created in the TUWEL course. I will then take up questions in the following lecture or answer them directly in the forum.

Please register in the TISS for the course so that you can access the TUWEL course and thereby gain access to further information or documents.

I wish you every success for the former students (despite the adverse circumstances), cordial greetings Prof. Dr. Mertz

Mode of examination

Written

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Thu10:00 - 12:0007.10.2021 - 27.01.2022FH Hörsaal 1 - MWB MERTZ
Fundamentals of Manufacturing Engineering - Single appointments
DayDateTimeLocationDescription
Thu07.10.202110:00 - 12:00FH Hörsaal 1 - MWB MERTZ
Thu14.10.202110:00 - 12:00FH Hörsaal 1 - MWB MERTZ
Thu21.10.202110:00 - 12:00FH Hörsaal 1 - MWB MERTZ
Thu28.10.202110:00 - 12:00FH Hörsaal 1 - MWB MERTZ
Thu04.11.202110:00 - 12:00FH Hörsaal 1 - MWB MERTZ
Thu11.11.202110:00 - 12:00FH Hörsaal 1 - MWB MERTZ
Thu18.11.202110:00 - 12:00FH Hörsaal 1 - MWB MERTZ
Thu25.11.202110:00 - 12:00FH Hörsaal 1 - MWB MERTZ
Thu02.12.202110:00 - 12:00FH Hörsaal 1 - MWB MERTZ
Thu09.12.202110:00 - 12:00FH Hörsaal 1 - MWB MERTZ
Thu16.12.202110:00 - 12:00FH Hörsaal 1 - MWB MERTZ
Thu13.01.202210:00 - 12:00FH Hörsaal 1 - MWB MERTZ
Thu20.01.202210:00 - 12:00FH Hörsaal 1 - MWB MERTZ
Thu27.01.202210:00 - 12:00FH Hörsaal 1 - MWB MERTZ

Examination modalities

Written exam at the end of semester, in principle 3-4 exam dates are offered each semester

Attention: Currently the exams are planned again in presence.
                If the circumstances force changes here too, an agreement will be made in due time - therefore, please also note here TU transmissions, mail communications or corresponding information in TUWEL.

If you have any questions regarding the examination, please contact directly by e-mail to Prof. Dr. Mertz: mertz@ift.at

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Fri13:00 - 15:0010.12.2021FH Hörsaal 1 - MWB written29.11.2021 00:00 - 08.12.2021 23:59TISSGrundlagen der Fertigungstechnik; Prüfung
Tue10:00 - 12:0021.12.2021GM 1 Audi. Max.- ARCH-INF written13.12.2021 00:00 - 19.12.2021 23:59TISSGrundlagen der Fertigungstechnik - Prüfung
Fri13:00 - 15:0021.01.2022FH Hörsaal 1 - MWB written03.01.2022 00:00 - 19.01.2022 23:59TISSGrundlagen der Fertigungstechnik; Prüfung
Thu10:00 - 12:0027.01.2022FH Hörsaal 1 - MWB written17.01.2022 00:00 - 24.01.2022 23:59TISSGrundlagen der Fertigungstechnik - Prüfung
Mon09:00 - 11:0014.02.2022FH Hörsaal 1 - MWB written28.01.2022 00:00 - 12.02.2022 23:59TISSGrundlagen der Fertigungstechnik; Prüfung

Group dates

GroupDayTimeDateLocationDescription
Kohorte A-MThu10:00 - 12:0007.10.2021 - 16.12.2021FH Hörsaal 1 - MWB 311.620 Fundamentals of Manufacturing Engineering Kohorte A-M
Kohorte A-MThu10:00 - 12:0020.01.2022FH Hörsaal 1 - MWB 311.620 Fundamentals of Manufacturing Engineering Kohorte A-M
Kohorte N-ZThu10:00 - 12:0014.10.2021 - 09.12.2021FH Hörsaal 1 - MWB 311.620 Fundamentals of Manufacturing Engineering Kohorte N-Z
Kohorte N-ZThu10:00 - 12:0013.01.2022 - 27.01.2022FH Hörsaal 1 - MWB 311.620 Fundamentals of Manufacturing Engineering Kohorte N-Z

Course registration

Begin End Deregistration end
22.09.2021 23:59 30.12.2021 23:59 30.12.2021 23:59

Group Registration

GroupRegistration FromTo
Kohorte A-M01.09.2021 00:00
Kohorte N-Z01.09.2021 00:00

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering 1. Semestertrue
Course belongs to the introductory and orientation phase ("Studieneingangs- und Orientierungsphase")
033 282 Mechanical Engineering - Management 1. Semestertrue
Course belongs to the introductory and orientation phase ("Studieneingangs- und Orientierungsphase")
700 Mechanical Engineering 1. Semester
740 Industrial Engineering-Management 1. Semester

Literature

Lecture notes can be obtained by contacting Mrs. Janosik, from Monday to Thursday, between 08:00 and 13:30, Institute of Production Engineering and Photonic Technologies, Getreidemarkt 9 BA 08/311, 1060 Wien

Accompanying courses

Continuative courses

Language

German