311.108 Workshop on Production Technology
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2022W, PR, 4.0h, 2.0EC
TUWEL

Properties

  • Semester hours: 4.0
  • Credits: 2.0
  • Type: PR Project
  • Format: Presence

Learning outcomes

After successful completion of the course, students are able to deepen in the lecture bases of the production engineering to provided knowledge mainly in the area of the chip ends manufacturing, however, also in the area of the manufacturing without chip by independent application of the procedures in machines of the lab for production engineering and the lab of the institute of Umformtechnik and high-capacity laser technology

Subject of course

Production of work pieces by means of the procedures wooden processing, forging, welding, milling, drilling, grinding in conventional machines and NC machines 

Teaching methods

practical practise with explanations of the technology in the respective machines

Mode of examination

Immanent

Additional information

INFO for registration: only one LVA registration is not enough, the group registration applies primarily!

With the training period in the lab for production engineering the following is to be followed for safety reasons: - Working clothes (long trousers and long sleeved outerwear - clothes where soiling plays no role) - closed footwear - hair protection (cap, hair-band, etc.) with long hair

Welding gloves, working gloves as well as protective glasses can be acquired if not available at the beginning of the practise in the lab.

Practice hours in principle on the practice days: 8.30 o'clock - 16.00 o'clock

At the end of the practise a protocol is to be provided.

--> for further information see moreover: TUWEL

ATTENTION: for HTLer (Mechanical engineering - other disciplines on demand) there is a shortened practise procedure-> own appointment (Proof necessarily)

Abbreviations in the group registration:
H1..  stands for appointment 1 for HTLer (per Semester 2-3 dates, H1,H2,...) 
S1..  stands for appointment 1 in the Sommersemster (per Semester 5-6 dates for 12-20 student each, S1,S2,...)
W1.. stands for appointment 1 in the Wintersemster (per Semester 5-6 dates for 12-20 student each, W1,W2,...)
 
-> for further information see moreover: TUWEL
 
Immediately after the registration, a schedule with the possible practice days (timeslot 10-12 working days) with instructions and samples will be sent by mail to all (regular places and waiting list places). 
This plan shall include those times when there is a collision with other exercises or exams. Note: The exercise consists of 6 practice days which must be divided into the planned exercise time area. 
In order to be able to implement the blocked exercise scam, however, only a maximum of 2 days can be chosen. This feedback must be forthcoming. 
If this is not done on time, the practice site will be forwarded to students on the waiting list. For more information, see also TUWEL.

PRESENCE DUTY is valid for the preliminary discussion (currently in the form of a ZOOM Meeting), by prevention absolutely by mail (mertz@ift.at) on time answer give otherwise the practise place gets lost, the place will award to StudentenInnen from the waiting list. Join the ZOOM Meeting waiting room in a timely manner!

The training days are already allocated before or immediately after the preliminary meeting. This can be generally or up to 2 days later on TUWEL. Currently, the training schedule is sent with the invitation data of the ZOOM meeting before the preliminary meeting.

MEETING PLACE on site and Journey plan: see in the German description

Lecturers

Institute

Examination modalities

permananet during the practise, as well as a protocol about the practise

Group dates

GroupDayTimeDateLocationDescription
HTLer Termin H1 --> Anmeldevoraussetzungen, Mails sowie TUWEL Einträge beachten!!!Wed10:30 - 11:3016.11.2022 Zoom Meeting311.108 Workshop on Production Technology H1 !!!Nur für HTL-Absolventen die metallbearbeitende Werkstätten besuchten!!!Zeugnis-Kopie!!!
HTLer Termin H2 --> Anmeldevoraussetzungen, Mails sowie TUWEL Einträge beachten!!!Tue10:00 - 11:0017.01.2023 Zoom Meeting311.108 Workshop on Production Technology H2 !!!Nur für HTL-Absolventen die metallbearbeitende Werkstätten besuchten!!!Zeugnis-Kopie!!!
W1 --> Terminanfrage per Mail nach Anmeldung rasch beantwortenWed09:00 - 10:0028.09.2022 Zoom Meeting311.108 Workshop FET-Lab W1 --> Terminanfrage per Mail nach Anmeldung rasch beantworten, compulsory attendance
W1 --> Terminanfrage per Mail nach Anmeldung rasch beantworten08:00 - 16:0003.10.2022 - 14.10.2022Seminarraum O221-2 311.108 Workshop on Production Technology W1 --> Terminanfrage per Mail nach Anmeldung rasch beantworten
W2 --> Terminanfrage per Mail nach Anmeldung rasch beantwortenWed09:00 - 10:0012.10.2022 Zoom Meeting311.108 Workshop FET-Lab W2 --> Terminanfrage per Mail nach Anmeldung rasch beantworten, compulsory attendance
W2 --> Terminanfrage per Mail nach Anmeldung rasch beantworten08:00 - 16:0017.10.2022 - 31.10.2022Seminarraum O221-2 311.108 Workshop on Production Technology W2 --> Terminanfrage per Mail nach Anmeldung rasch beantworten
W3 --> Terminanfrage per Mail nach Anmeldung rasch beantwortenTue09:00 - 10:0025.10.2022 Zoom Meeting311.108 Workshop on Production Technology W3 --> Terminanfrage per Mail nach Anmeldung rasch beantworten, compulsory attendance
W3 --> Terminanfrage per Mail nach Anmeldung rasch beantworten08:00 - 16:0007.11.2022 - 18.11.2022Seminarraum O221-2 311.108 Workshop on Production Technology W3 --> Terminanfrage per Mail nach Anmeldung rasch beantworten
W4 --> Terminanfrage per Mail nach Anmeldung rasch beantwortenWed09:00 - 10:0016.11.2022 Zoom Meeting311.108 Workshop FET-Lab W4 --> Terminanfrage per Mail nach Anmeldung rasch beantworten, compulsory attendance
W4 --> Terminanfrage per Mail nach Anmeldung rasch beantworten08:00 - 16:0021.11.2022 - 02.12.2022Seminarraum O221-2 311.108 Workshop on Production Technology W4 --> Terminanfrage per Mail nach Anmeldung rasch beantworten
W5 --> Terminanfrage per Mail nach Anmeldung rasch beantwortenWed09:00 - 10:0030.11.2022 Zoom Meeting311.108 Workshop FET-Lab W5 --> Terminanfrage per Mail nach Anmeldung rasch beantworten, compulsory attendance
W5 --> Terminanfrage per Mail nach Anmeldung rasch beantworten08:00 - 16:0005.12.2022 - 20.12.2022Seminarraum O221-2 311.108 Workshop on Production Technology W5 --> Terminanfrage per Mail nach Anmeldung rasch beantworten
W6 --> Terminanfrage per Mail nach Anmeldung rasch beantwortenWed09:00 - 10:0021.12.2022 Zoom Meeting311.108 Workshop on Production Technology W6 --> Terminanfrage per Mail nach Anmeldung rasch beantworten, compulsory attendance
W6 --> Terminanfrage per Mail nach Anmeldung rasch beantworten08:00 - 16:0009.01.2023 - 20.01.2023Seminarraum O221-2 311.108 Workshop on Production Technology W6 --> Terminanfrage per Mail nach Anmeldung rasch beantworten

Course registration

Use Group Registration to register.

Precondition

The student must have at least all of the course(s) completed listed below:

Group Registration

GroupRegistration FromTo
HTLer Termin H1 --> Anmeldevoraussetzungen, Mails sowie TUWEL Einträge beachten!!!31.10.2022 08:0006.11.2022 00:00
HTLer Termin H2 --> Anmeldevoraussetzungen, Mails sowie TUWEL Einträge beachten!!!02.01.2023 08:0006.01.2023 12:00
W1 --> Terminanfrage per Mail nach Anmeldung rasch beantworten19.09.2022 08:0022.09.2022 12:00
W2 --> Terminanfrage per Mail nach Anmeldung rasch beantworten03.10.2022 08:0006.10.2022 12:00
W3 --> Terminanfrage per Mail nach Anmeldung rasch beantworten17.10.2022 08:0020.10.2022 12:00
W4 --> Terminanfrage per Mail nach Anmeldung rasch beantworten07.11.2022 08:0010.11.2022 12:00
W5 --> Terminanfrage per Mail nach Anmeldung rasch beantworten21.11.2022 08:0023.11.2022 12:00
W6 --> Terminanfrage per Mail nach Anmeldung rasch beantworten12.12.2022 08:0014.12.2022 12:00

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering 2. Semester
033 282 Mechanical Engineering - Management 2. Semester

Literature

No lecture notes are available.

Miscellaneous

  • Attendance Required!

Language

German