311.108 Workshop on Production Technology
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2022S, PR, 4.0h, 2.0EC

Properties

  • Semester hours: 4.0
  • Credits: 2.0
  • Type: PR Project
  • Format: Distance Learning

Learning outcomes

After successful completion of the course, students are able to deepen in the lecture bases of the production engineering to provided knowledge mainly in the area of the chip ends manufacturing, however, also in the area of the manufacturing without chip by independent application of the procedures in machines of the lab for production engineering and the lab of the institute of Umformtechnik and high-capacity laser technology

Subject of course

Production of work pieces by means of the procedures forging, welding, milling, drilling, grinding, lapping, bending in conventional machines and NC machines, wood processing.

Teaching methods

permananet during the practice, as well as a protocol about the practice

Mode of examination

Immanent

Additional information

INFO for registration: only one LVA registration is not enough, the group registration applies primarily!

With the training period in the lab for production engineering the following is to be followed for safety reasons: - Working clothes (clothes where soiling plays no role) - closed footwear - hair protection (cap, hair-band, etc.) with long hair

Welding gloves, working gloves as well as protective glasses can be acquired if not available at the beginning of the practise in the lab.

At the end of the practise a protocol is to be provided (pdf upload on TUWEL).

--> for further information see moreover: TUWEL

ATTENTION: for HTLer there is a shortened practise procedure-> own appointment H1, H12,... (Proof necessarily) 

                      by the appointments a proof is to be brought in the form of a report copy (with the workshop mark), then the report mark
                      as well as a protocol to be made prove the charge mark

Abbreviations in the group registration:
H1..  stands for appointment 1 for HTLer
S1..  stands for appointment 1 in the Sommersemster
W1.. stands for appointment 1 in the Wintersemster
 
ATTENTION: for reasons pertaining to labour law a participation in the practise is not permitted for pregnant or satisfying students 
 
-> for further information see moreover: TUWEL
 
Immediately after registration, a schedule with the possible practice days will be sent to everyone (regular places and waiting list places) per Mail. In this case, the times at which a collision with other exercises or tests exists must be entered. 
In order to be able to implement the blocked exercise drugstore, however, it is only possible to choose a maximum of 2 days. This acknowledgement must be made ex marte. If this is not done within the time limit, 
the practice site will be forwarded to users of the waiting list. For more details, see also TUWEL.

PRESENCE DUTY is valid for the preliminary discussion (currently in the form of a ZOOM Meeting), by prevention absolutely by mail (mertz@ift.at) on time answer give otherwise the practise place gets lost, the place will award to StudentenInnen from the waiting list. Join the ZOOM Meeting waiting room in a timely manner!

The training days are already allocated before or immediately after the preliminary meeting. This can be generally or up to 2 days later on TUWEL. Currently, the training schedule is sent with the invitation data of the ZOOM meeting before the preliminary meeting.

MEETING PLACE on site and Journey plan: see in the German description

 

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Wed09:00 - 10:0002.03.2022 Zoom Meeting (LIVE)311.108 FETLab Vorbesprechung S1, es gilt Anwesenheitspflicht
08:30 - 16:0007.03.2022 - 18.03.2022Seminarraum O221-2 311.108 Fertigungstechnisches Labor S1
Wed09:00 - 10:0023.03.2022 Zoom Meeting (LIVE)311.108 FETLab Vorbesprechung S2, es gilt Anwesenheitspflicht
08:30 - 16:0028.03.2022 - 08.04.2022Seminarraum O221-2 311.108 Fertigungstechnisches Labor S2
Tue09:00 - 10:0005.04.2022 Zoom Meeting (LIVE)311.108 Fertigungstechnisches Labor H1 - nur für HTL-Absolventen die metallbearbeitende Werkstätten besuchten - Zeugnis Kopie !!!
Wed09:00 - 10:0027.04.2022 Zoom Meeting (LIVE)311.108 FETLab Vorbesprechung S3, es gilt Anwesenheitspflicht
08:30 - 16:0002.05.2022 - 13.05.2022Seminarraum O221-2 311.108 Fertigungstechnisches Labor S3
Wed09:00 - 10:0011.05.2022 Zoom Meeting (LIVE)311.108 FETLab Vorbesprechung S4, es gilt Anwesenheitspflicht
08:30 - 16:0016.05.2022 - 31.05.2022Seminarraum O221-2 311.108 Fertigungstechnisches Labor S4
Wed09:00 - 10:0025.05.2022 Zoom Meeting (LIVE)311.108 FETLab Vorbesprechung S5, es gilt Anwesenheitspflicht
08:30 - 16:0001.06.2022 - 17.06.2022Seminarraum O221-2 311.108 Fertigungstechnisches Labor S5
Wed09:00 - 10:0008.06.2022 Zoom Meeting (LIVE)311.108 Fertigungstechnisches Labor H12- nur für HTL-Absolventen die metallbearbeitende Werkstätten besuchten - Zeugnis Kopie !!!
Tue09:00 - 10:0014.06.2022 Zoom Meeting (LIVE)311.108 FETLab Vorbesprechung S6, es gilt Anwesenheitspflicht
08:30 - 16:0020.06.2022 - 01.07.2022 Arsenal Obj. OA/E311 - LWS Labor311.108 Fertigungstechnisches Labor S6
Workshop on Production Technology - Single appointments
DayDateTimeLocationDescription
Wed02.03.202209:00 - 10:00 Zoom Meeting311.108 FETLab Vorbesprechung S1, es gilt Anwesenheitspflicht
Mon07.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S1
Tue08.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S1
Wed09.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S1
Thu10.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S1
Fri11.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S1
Mon14.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S1
Tue15.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S1
Wed16.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S1
Thu17.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S1
Fri18.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S1
Wed23.03.202209:00 - 10:00 Zoom Meeting311.108 FETLab Vorbesprechung S2, es gilt Anwesenheitspflicht
Mon28.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S2
Tue29.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S2
Wed30.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S2
Thu31.03.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S2
Fri01.04.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S2
Mon04.04.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S2
Tue05.04.202208:30 - 16:00Seminarraum O221-2 311.108 Fertigungstechnisches Labor S2
Tue05.04.202209:00 - 10:00 Zoom Meeting311.108 Fertigungstechnisches Labor H1 - nur für HTL-Absolventen die metallbearbeitende Werkstätten besuchten - Zeugnis Kopie !!!

Examination modalities

permananet during the practice, as well as a protocol about the practice

Course registration

Use Group Registration to register.

Precondition

The student must have at least all of the course(s) completed listed below:

Group Registration

GroupRegistration FromTo
H1 - Mails beachten sowie TUWEL Einträge!!!21.03.2022 08:0025.03.2022 12:00
H2 - Mails beachten sowie TUWEL Einträge!!!23.05.2022 08:0027.05.2022 12:00
S121.02.2022 08:0023.02.2022 12:00
S214.03.2022 08:0016.03.2022 12:00
S304.04.2022 08:0006.04.2022 12:00
S402.05.2022 08:0004.05.2022 12:00
S516.05.2022 08:0018.05.2022 12:00
S606.06.2022 08:0008.06.2022 12:00

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering 2. Semester
033 282 Mechanical Engineering - Management 2. Semester

Literature

No lecture notes are available.

Miscellaneous

Language

German