308.878 Materials Selection
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2022S, VO, 2.0h, 3.0EC
TUWELLectureTube

Properties

  • Semester hours: 2.0
  • Credits: 3.0
  • Type: VO Lecture
  • LectureTube course
  • Format: Presence

Learning outcomes

After successful completion of the course, students are able to describe application-related load scenarios by basic material parameters and hence to select materials based on this requirement profile as well as to select the suitable shaping process.

Subject of course

Functional requirements have to be translated into material preformance and property data of engieering materials; Combinations of service requirements are expressed by performance parameters; material selection requires selection of shaping process; Case studies with application of Cambridge Materials and Process Selectors

Teaching methods

 Application of basic knowledge in the field of materials science, as well as the use of Cambridge Material and Process Selectors to perform a materials selection.

Mode of examination

Written

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Tue17:00 - 18:0015.03.2022GM 3 Vortmann Hörsaal - VT prelimenary meeting
Tue08:00 - 10:0029.03.2022 - 21.06.2022GM 3 Vortmann Hörsaal - VT VO Materials Selection
Tue08:00 - 10:0017.05.2022GM 3 Vortmann Hörsaal - VT Fallbeispiele/Prüfungsvorbereitung + Materials Selector, Hands on
Wed08:00 - 10:0008.06.2022GM 3 Vortmann Hörsaal - VT Fallbeispiele, Kurzpräsentationen Studenten
Materials Selection - Single appointments
DayDateTimeLocationDescription
Tue15.03.202217:00 - 18:00GM 3 Vortmann Hörsaal - VT prelimenary meeting
Tue29.03.202208:00 - 10:00GM 3 Vortmann Hörsaal - VT VO Materials Selection, Unit 1 - 4
Tue05.04.202208:00 - 10:00GM 3 Vortmann Hörsaal - VT VO Materials Selection, Unit 1 - 4
Tue26.04.202208:00 - 10:00GM 3 Vortmann Hörsaal - VT VO Materials Selection, Unit 1 - 4
Tue03.05.202208:00 - 10:00GM 3 Vortmann Hörsaal - VT VO Materials Selection, Unit 1 - 4
Tue10.05.202208:00 - 10:00GM 3 Vortmann Hörsaal - VT VO Materials Selection, Unit 1 - 4
Tue17.05.202208:00 - 10:00GM 3 Vortmann Hörsaal - VT Fallbeispiele/Prüfungsvorbereitung + Materials Selector, Hands on
Wed08.06.202208:00 - 10:00GM 3 Vortmann Hörsaal - VT Fallbeispiele, Kurzpräsentationen Studenten
Tue21.06.202208:00 - 10:00GM 3 Vortmann Hörsaal - VT Case studies, presentations students

Examination modalities

The course assessment will be based on an written exam.

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Thu08:00 - 10:0027.06.2024GM 5 Praktikum HS- TCH written28.04.2024 00:00 - 14.06.2024 00:00TISSPrüfung Werkstoffauswahl
Mon10:00 - 12:0015.07.2024GM 3 Vortmann Hörsaal - VT written06.06.2024 15:00 - 12.07.2024 15:00TISSPrüfung Werkstoffauswahl
Thu08:00 - 10:0026.06.2025GM 5 Praktikum HS- TCH written27.04.2025 00:00 - 13.06.2025 00:00TISSPrüfung Werkstoffauswahl
Mon10:00 - 12:0014.07.2025GM 3 Vortmann Hörsaal - VT written05.06.2025 15:00 - 11.07.2025 15:00TISSPrüfung Werkstoffauswahl

Course registration

Begin End Deregistration end
01.03.2022 10:00 30.03.2022 10:00

Curricula

Study CodeObligationSemesterPrecon.Info
033 245 Mechanical Engineering Not specifiedSTEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management Not specifiedSTEOP
Course requires the completion of the introductory and orientation phase
066 434 Materials Sciences Not specified
066 445 Mechanical Engineering Mandatory electiveSTEOP
Course requires the completion of the introductory and orientation phase
066 473 Chemical and Process Engineering Mandatory elective
066 482 Mechanical Engineering - Management Mandatory electiveSTEOP
Course requires the completion of the introductory and orientation phase

Literature

Literatur:
 
  • M.F. Ashby, K. Johnson, Materials and Design: The Art and Science of Material Selection in Product Design, Butterworth-Heinemann, 2013.
  • M. Reuter, Methodik der Werkstoffauswahl, Fachbuchverl. Leipzig im Carl Hanser Verlag, 2007.
  • W.D. Callister, D.G. Rethwisch, M. Scheffler, F. Scheffler, M. Krüger, H.J. Möhring, Materialwissenschaften und Werkstofftechnik: Eine Einführung, VCH, 2012.
  • J. Rösler, H. Harders, M. Bäker, Mechanisches Verhalten der Werkstoffe, 2003.
  • H.-J. Bargel, G. Schulze, Werkstoffkunde, Springer-Verlag, 2008.
  • W. Bleck, Material Science of Steel: Textbook for RWTH Students, Mainz, 2007.
  • W. Bleck, U.J. Achenbach, Werkstoffprüfung in Studium und Praxis, Aufl. 14, Mainz: Wissenschaftsverlag (1997).

Ergänzende Unterlagen:

Previous knowledge

Basic materials science

Overview on engineering materials

Language

German