307.495 Machine Design 2
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2023S, VO, 3.0h, 3.0EC
TUWELLectureTubeQuinn ECTS survey

Properties

  • Semester hours: 3.0
  • Credits: 3.0
  • Type: VO Lecture
  • LectureTube course
  • Format: Hybrid

Learning outcomes

After successful completion of the course, students are able to...

- calculate and design selected machine elements according to standards and design guidelines

- perform design tasks on their own

- to recognize and evaluate pros and cons of machine elements under the relevant aspects of operation and design

Subject of course

Correct design and calculation of the following machine- and design-elements: clutches, belt- and chain drives, gears and gearboxes including DIN3990 (theory and calculations).

Teaching methods

- Lectures about basics and design/calculation tools for the listed content

- Practice and application of the content with examples of machine elements, with guidance by the lecturer

- Hybred format of lecture with livestreams, recordings and interactive phases.

- In addition TUWEL-course

Mode of examination

Written

Additional information

Lectures will be held in hybrid modus: in presence in Radinger Lecture room, BD Hoftrakt, in parallel  livestream and recording in lecture tube which is available in TUWEL afterwards.

During March HS 18 Czuber MB in the main building at Karlsplatz is reserved to follow the lectures via livestream.

Start of the lectures: Tuesday, March 1st, 2022.

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Thu12:00 - 14:0002.03.2023 - 29.06.2023GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Tue14:00 - 16:0007.03.2023 - 27.06.2023GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Machine Design 2 - Single appointments
DayDateTimeLocationDescription
Thu02.03.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Tue07.03.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Thu09.03.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Tue14.03.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Thu16.03.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Tue21.03.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Thu23.03.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Tue28.03.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Thu30.03.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Tue18.04.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Thu20.04.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Tue25.04.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Thu27.04.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Tue02.05.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Thu04.05.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Tue09.05.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Thu11.05.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Tue16.05.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Tue23.05.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2
Thu25.05.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH VO Lecture Machine Elements 2

Examination modalities

Exam only offerd in German.

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Fri14:00 - 17:0028.04.2023EI 7 Hörsaal - ETIT written10.04.2023 08:00 - 24.04.2023 23:45TISSPrüf. MEL Prof. Weigand
Fri14:00 - 17:0028.04.2023HS 18 Czuber - MB written10.04.2023 08:00 - 24.04.2023 23:45TISSPrüf. MEL Prof. Weigand
Fri14:00 - 17:0028.04.2023EI 9 Hlawka HS - ETIT written10.04.2023 08:00 - 24.04.2023 23:45TISSPrüf. MEL Prof. Weigand
Mon10:00 - 14:0022.05.2023GM 4 Knoller Hörsaal - VT oralno application-Prüf. MEL Prof. Weigand mündl.
Fri11:00 - 14:0009.06.2023FH Hörsaal 1 - MWB written23.05.2023 08:00 - 07.06.2023 23:45TISSPrüf. MEL Prof. Weigand
Fri11:00 - 14:0009.06.2023GM 1 Audi. Max.- ARCH-INF written23.05.2023 08:00 - 07.06.2023 23:45TISSPrüf. MEL Prof. Weigand
Fri12:00 - 17:0030.06.2023GM 4 Knoller Hörsaal - VT oralno application-Prüf. MEL Prof. Weigand mündl.
Thu11:00 - 14:0021.09.2023GM 5 Praktikum HS- TCH written03.09.2023 08:00 - 19.09.2023 23:45TISSPrüf. MEL Prof. Weigand
Thu11:00 - 14:0021.09.2023Informatikhörsaal - ARCH-INF written03.09.2023 08:00 - 19.09.2023 23:45TISSPrüf. MEL Prof. Weigand
Thu11:00 - 14:0021.09.2023GM 2 Radinger Hörsaal - TCH written03.09.2023 08:00 - 19.09.2023 23:45TISSPrüf. MEL Prof. Weigand

Course registration

Begin End Deregistration end
03.10.2022 00:00

Registration modalities

It ist not necessary to enroll into the course itself. However an enrollment is mandatory if you want to participate in the TUWEL-lectures

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering 4. SemesterSTEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management 4. SemesterSTEOP
Course requires the completion of the introductory and orientation phase

Literature

Lecture notes for the courses in machine design 2 cost 15€ and are available in the sekretariate during normal office hours.
There is no PDF-version available.
Via TISS you can get handouts of the lecture as pdf's.

Niemann-Winter-Höhn: Maschinenelemente - Steinhilper-Röper: Maschinen-u. Konstruktionselemente Bd. 1-3, - Lecture notes of the course "Grundlagen der Konstruktionslehre" (LVA: 307.428) of Prof. Kartnig

Previous knowledge

An overview of all lectures about machine design can be found at http://www.ikp.tuwien.ac.at/mel

Preceding courses

Accompanying courses

Continuative courses

Miscellaneous

Language

German