307.494 Machine Design 1
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2023W, VO, 3.0h, 3.0EC
TUWELLectureTube

Properties

  • Semester hours: 3.0
  • Credits: 3.0
  • Type: VO Lecture
  • LectureTube course
  • Format: Hybrid

Learning outcomes

After successful completion of the course, students are able to...

- calculate and design selected machine elements according to standards and design guidelines

- perform design tasks on their own

- to recognize and evaluate pros and cons of machine elements under the relevant aspects of operation and design

Subject of course

Correct design and calculation of the following machine - and design-elements: Journal bearings and HD-theory, radial and axial-bearings, antifriction bearings-Hertzian pressure, theory of ball- and roller bearings, materials and strength, design and mounting of bearings, shafts calculation and design, critical speed and torsional vibrations, hubs, keys, seals, lubrication.

Teaching methods

- Lectures about basics and design/calculation tools for the listed content

- Practice and application of the content with examples of machine elements, with guidance by the lecturer.

Mode of examination

Written

Additional information

Lectures will be held in hybrid modus: in presence in Radinger Lecture room, BD Hoftrakt, in parallel  livestream and recording in lecture tube which is available in TUWEL afterwards.

Start of the lectures: Wednesday,, October 05th, 2022

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Wed14:00 - 16:0004.10.2023 - 24.01.2024GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon12:00 - 14:0009.10.2023 - 22.01.2024GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon12:00 - 14:0013.11.2023HS 18 Czuber - MB Ausweichtermin (GM2 besetzt)
Wed16:00 - 18:0022.11.2023GM 2 Radinger Hörsaal - TCH Special lecture (lecture series machine elements) in the context of VO MEL 2
Machine Design 1 - Single appointments
DayDateTimeLocationDescription
Wed04.10.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon09.10.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed11.10.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon16.10.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed18.10.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon23.10.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed25.10.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon30.10.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon06.11.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed08.11.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon13.11.202312:00 - 14:00HS 18 Czuber - MB Ausweichtermin (GM2 besetzt)
Mon20.11.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed22.11.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed22.11.202316:00 - 18:00GM 2 Radinger Hörsaal - TCH Special lecture (lecture series machine elements) in the context of VO MEL 2
Mon27.11.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed29.11.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon04.12.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed06.12.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Mon11.12.202312:00 - 14:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO
Wed13.12.202314:00 - 16:00GM 2 Radinger Hörsaal - TCH 307.494 Machine Elements 1 VO

Examination modalities

Exam only offered in German.

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Tue13:00 - 17:0021.05.2024GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf. MEL Prof. Weigand mündl. VERSCHOBEN AUF 24.05.2024 10:00
Fri08:00 - 11:0014.06.2024FH Hörsaal 1 - MWB written03.06.2024 08:00 - 11.06.2024 23:45TISSPrüf. MEL Prof. Weigand
Fri08:00 - 11:0014.06.2024HS 18 Czuber - MB written03.06.2024 08:00 - 11.06.2024 23:45TISSPrüf. MEL Prof. Weigand
Tue09:00 - 13:0002.07.2024GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf. MEL Prof. Weigand mündl.
Thu08:00 - 11:0026.09.2024GM 2 Radinger Hörsaal - TCH written02.09.2024 08:00 - 22.09.2024 23:45TISSPrüf. MEL Prof. Weigand
Thu08:00 - 11:0026.09.2024Informatikhörsaal - ARCH-INF written02.09.2024 08:00 - 22.09.2024 23:45TISSPrüf. MEL Prof. Weigand
Thu08:00 - 11:0026.09.2024GM 5 Praktikum HS- TCH written02.09.2024 08:00 - 22.09.2024 23:45TISSPrüf. MEL Prof. Weigand
Tue13:00 - 16:0008.10.2024GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf. MEL Prof. Weigand mündl.
Fri12:00 - 15:0011.10.2024HS 18 Czuber - MB written20.09.2024 08:00 - 08.10.2024 23:45TISSPrüf. MEL Prof. Weigand
Fri12:00 - 15:0011.10.2024FH Hörsaal 1 - MWB written20.09.2024 08:00 - 08.10.2024 23:45TISSPrüf. MEL Prof. Weigand
Fri12:00 - 15:0011.10.2024GM 5 Praktikum HS- TCH written20.09.2024 08:00 - 08.10.2024 23:45TISSPrüf. MEL Prof. Weigand
Tue13:00 - 16:0005.11.2024GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf. MEL Prof. Weigand mündl.
Wed09:00 - 12:0013.11.2024GM 1 Audi. Max.- ARCH-INF written01.11.2024 08:00 - 10.11.2024 23:45TISSPrüf. MEL Prof. Weigand
Tue13:00 - 16:0003.12.2024GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf. MEL Prof. Weigand mündl.
Fri12:00 - 15:0017.01.2025HS 8 Heinz Parkus - CEE written03.01.2025 08:00 - 14.01.2025 23:45TISSPrüf. MEL Prof. Weigand
Fri12:00 - 15:0017.01.2025FH 8 Nöbauer HS - MATH written03.01.2025 08:00 - 14.01.2025 23:45TISSPrüf. MEL Prof. Weigand
Fri12:00 - 15:0017.01.2025HS 14A Günther Feuerstein written03.01.2025 08:00 - 14.01.2025 23:45TISSPrüf. MEL Prof. Weigand
Fri12:00 - 15:0017.01.2025Hörsaal 6 - RPL written03.01.2025 08:00 - 14.01.2025 23:45TISSPrüf. MEL Prof. Weigand
Fri12:00 - 15:0017.01.2025EI 7 Hörsaal - ETIT written03.01.2025 08:00 - 14.01.2025 23:45TISSPrüf. MEL Prof. Weigand
Tue09:00 - 12:0004.02.2025GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf. MEL Prof. Weigand mündl.
Thu08:00 - 11:0020.02.2025GM 2 Radinger Hörsaal - TCH written06.02.2025 08:00 - 16.02.2025 23:45TISSPrüf. MEL Prof. Weigand
Thu08:00 - 11:0020.02.2025FH Hörsaal 1 - MWB written06.02.2025 08:00 - 16.02.2025 23:45TISSPrüf. MEL Prof. Weigand
Tue09:00 - 12:0011.03.2025GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf. MEL Prof. Weigand mündl.
Fri11:00 - 14:0002.05.2025GM 1 Audi. Max.- ARCH-INF written14.04.2025 08:00 - 29.04.2025 23:45TISSPrüf. MEL Prof. Weigand
Fri11:00 - 14:0002.05.2025FH Hörsaal 1 - MWB written14.04.2025 08:00 - 29.04.2025 23:45TISSPrüf. MEL Prof. Weigand
Tue13:00 - 17:0020.05.2025GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf. MEL Prof. Weigand mündl.
Fri08:00 - 11:0020.06.2025FH Hörsaal 1 - MWB written09.06.2025 08:00 - 17.06.2025 23:45TISSPrüf. MEL Prof. Weigand
Fri08:00 - 11:0020.06.2025HS 18 Czuber - MB written09.06.2025 08:00 - 17.06.2025 23:45TISSPrüf. MEL Prof. Weigand
Tue09:00 - 13:0001.07.2025GM 8/9 - Hörsaal des Internationalen Wiener Motorensymposiums oralno application-Prüf. MEL Prof. Weigand mündl.
Thu08:00 - 11:0025.09.2025GM 2 Radinger Hörsaal - TCH written01.09.2025 08:00 - 21.09.2025 23:45TISSPrüf. MEL Prof. Weigand
Thu08:00 - 11:0025.09.2025Informatikhörsaal - ARCH-INF written01.09.2025 08:00 - 21.09.2025 23:45TISSPrüf. MEL Prof. Weigand
Thu08:00 - 11:0025.09.2025GM 5 Praktikum HS- TCH written01.09.2025 08:00 - 21.09.2025 23:45TISSPrüf. MEL Prof. Weigand

Course registration

Begin End Deregistration end
02.10.2023 00:00

Registration modalities

It ist not necessary to enroll into the course itself. However an enrollment is mandatory if you want to participate in the TUWEL-lectures

Curricula

Study CodeObligationSemesterPrecon.Info
033 245 Mechanical Engineering Mandatory3. SemesterSTEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management Mandatory3. SemesterSTEOP
Course requires the completion of the introductory and orientation phase

Literature

The lecture notes for machine design (€ 15.00) can be purchased on Monday, Tuesday, Wednesday and Thursday from 08:00 – 12:00 in the BD03 secretariat.

If possible, form “buying groups” (one person buys several scripts) - Thank you.

There is no PDF-version available!

Via TUWEL you can get handouts and worksheets of the lecture.

Additional literature:

  • Niemann-Winter-Höhn: Maschinenelemente
  • Steinhilper-Röper: Maschinen-u. Konstruktionselemente Bd. 1-3
  • Lecture notes of the course "Grundlagen der Konstruktionslehre" (LVA: 307.428) of Prof. Kartnig

Previous knowledge

An overview of all lectures about machine design can be found at http://www.ikp.tuwien.ac.at/mel

Preceding courses

Accompanying courses

Continuative courses

Miscellaneous

Language

German