307.492 Machine Elements 3
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2022W, VO, 3.0h, 3.0EC
Lecture TubeTUWEL

Properties

  • Semester hours: 3.0
  • Credits: 3.0
  • Type: VO Lecture
  • LectureTube course
  • Format: Hybrid

Learning outcomes

After successful completion of the course, students are able to:

  • design planetary and bevel gear independently
  • explain the mode of operation of worm, cycloid gear and freewheels
  • calculate gear micro-geometries independently
  • understand the occurrence of gear damage and assess its consequences
  • master in-depth calculation tasks of machine construction
  • implementing machine designs with 3D CAD systems in a methodically sensible manner as well as using computer-aided design and verification methods
  • use common machine element calculation programs
  • describe the most important cost parameters using the example of gearbox construction
  • understand motion sequences and the resulting forces in gearboxes or multi-body simulation systems

Subject of course

  • freewheels
  • bevel gear cogs and gear
  • planetary gear
  • machine acustics
  • worm gear
  • high-ratio gear (Harmonic Drive, cycloid gear)
  • damage to teeth, fretting, grey spots
  • micro geometry of gears
  • construction methodology: costs
  • computer-aided design of transmissions
  • multibody system dynamic investigation of transmissions
  • computer-aided construction

Teaching methods

Lecture on the theoretical basics and basic calculations of the content mentioned above

  • practice and apply the content using examples
  • performance assessment through written and/or oral examination (VO)
  • creation of an independent construction with CAD
  • examination-based performance assessment (UE)

Mode of examination

Oral

Additional information

Lectures will be held in hybrid modus: in presence in Knoller Lecture room, BD Hoftrakt, in parallel  livestream and recording in lecture tube which is available in TUWEL afterwards.

Start of the lectures: Wednesday, October 05th, 2022

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Wed08:00 - 10:0005.10.2022 - 25.01.2023GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri08:00 - 10:0007.10.2022 - 20.01.2023GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri08:00 - 10:0028.10.2022GM 4 Knoller Hörsaal - VT Lecture Machine Elements 307.492
Machine Elements 3 - Single appointments
DayDateTimeLocationDescription
Wed05.10.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri07.10.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed12.10.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri14.10.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed19.10.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri21.10.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri28.10.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri28.10.202208:00 - 10:00GM 4 Knoller Hörsaal - VT Lecture Machine Elements 307.492
Fri04.11.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed09.11.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri11.11.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed16.11.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri18.11.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed23.11.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri25.11.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed30.11.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri02.12.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed07.12.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Fri09.12.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492
Wed14.12.202208:00 - 10:00GM 4 Knoller Hörsaal - VT VO Machine Elements 3 307.492

Examination modalities

Oral examination

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Fri - 17.02.2023oral17.01.2023 18:30 - 10.02.2023 23:59TISS307.492 VO Maschinenelemente 3 Prüfung - neu
Fri - 03.03.2023oral10.01.2023 18:30 - 24.02.2023 23:59TISS307.492 VO Maschinenelemente 3 Prüfung - neu
Fri14:00 - 18:0007.04.2023Seminarraum BD 02C oral06.03.2023 08:00 - 03.04.2023 23:59TISS307.492 VO Maschinenelemente 3 Prüfung
Fri14:00 - 18:0002.06.2023Seminarraum BD 03 oral06.03.2023 08:00 - 29.05.2023 23:59TISS307.492 VO Maschinenelemente 3 Prüfung

Course registration

Begin End Deregistration end
05.10.2022 01:00

Registration modalities

Für die LVA ist keihe Anmeldung erforderlich. Sie müssen sich aber anmelden, wenn Sie am TUWEL-Kurs teilnhehmen möchten.

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering STEOP
Course requires the completion of the introductory and orientation phase
033 282 Mechanical Engineering - Management STEOP
Course requires the completion of the introductory and orientation phase
066 445 Mechanical Engineering STEOP
Course requires the completion of the introductory and orientation phase
066 482 Mechanical Engineering - Management STEOP
Course requires the completion of the introductory and orientation phase

Literature

No lecture notes are available.

Previous knowledge

Basis are the lectures machine design 1 and 2

Preceding courses

Accompanying courses

Continuative courses

Language

German