307.428 Fundamentals of Engineering Design This course is in all assigned curricula part of the STEOP.
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2022S, VO, 2.0h, 3.0EC
TUWEL

Properties

  • Semester hours: 2.0
  • Credits: 3.0
  • Type: VO Lecture
  • Format: Presence

Learning outcomes

After successful completion of the course, students are able to create functional, material-appropriate, production-oriented and load-compliant designs of machine components and they are able to realise a proof of strength.

Subject of course

  • Manufacturing oriented design (machining, cast design, welded connections)

  • Strength calculation (materials, basic knowledge about stresses, causes of component failure, proof of strength according to the FKM guideline

  • Selected machine elements (roller bearings, screws, springs)

Teaching methods

Discussion of design examples, calculation of practice examples.

 

Mode of examination

Written

Additional information

Pandemiebedingt kann das Format der Abhaltung der LVA abweichen

Lecturers

Institute

Course dates

DayTimeDateLocationDescription
Tue10:00 - 12:0001.03.2022 - 28.06.2022FH Hörsaal 1 - MWB Vorlesung
Fundamentals of Engineering Design - Single appointments
DayDateTimeLocationDescription
Tue01.03.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue08.03.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue15.03.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue22.03.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue29.03.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue05.04.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue26.04.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue03.05.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue10.05.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue17.05.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue24.05.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue31.05.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue14.06.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue21.06.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung
Tue28.06.202210:00 - 12:00FH Hörsaal 1 - MWB Vorlesung

Examination modalities

Important note:

In the summer semester 2019, the FKM guideline for the verification of component strength was included in the teaching content of this lecture. Previous lecture notes (2018 and before) that are not based on the FKM guideline are therefore no longer part of this course.

Exams

DayTimeDateRoomMode of examinationApplication timeApplication modeExam
Tue16:00 - 19:0018.06.2024GM 1 Audi. Max.- ARCH-INF written22.05.2024 09:00 - 10.06.2024 17:00TISSPrüfung Juni
Tue16:00 - 19:0019.11.2024GM 1 Audi. Max.- ARCH-INF written25.09.2024 09:00 - 12.11.2024 17:00TISSPrüfung November
Tue16:00 - 19:0010.12.2024FH Hörsaal 1 - MWB written20.11.2024 09:00 - 03.12.2024 17:00TISSPrüfung Dezember
Tue16:00 - 19:0007.01.2025FH Hörsaal 1 - MWB written11.12.2024 09:00 - 31.12.2024 17:00TISSPrüfung Jänner
Tue14:00 - 17:0011.03.2025FH Hörsaal 1 - MWB written08.01.2025 09:00 - 04.03.2025 17:00TISSPrüfung März
Tue14:00 - 17:0008.04.2025FH Hörsaal 1 - MWB written04.03.2025 09:00 - 01.04.2025 17:00TISSPrüfung April
Tue14:00 - 17:0020.05.2025FH Hörsaal 1 - MWB written16.04.2025 09:00 - 12.05.2025 17:00TISSPrüfung Mai
Tue16:00 - 19:0017.06.2025GM 1 Audi. Max.- ARCH-INF written21.05.2025 09:00 - 09.06.2025 17:00TISSPrüfung Juni

Course registration

Not necessary

Curricula

Study CodeObligationSemesterPrecon.Info
033 245 Mechanical Engineering Mandatory2. Semestertrue
Course belongs to the introductory and orientation phase ("Studieneingangs- und Orientierungsphase")
033 282 Mechanical Engineering - Management Mandatory2. Semestertrue
Course belongs to the introductory and orientation phase ("Studieneingangs- und Orientierungsphase")

Literature

Lecture notes are available (https://shop.tuverlag.at/de/grundlagen-konstruktionslehre1?info=365)

 Further literature: Roloff Matek - Maschinenelemente, Decker - Maschinenelemente, Böge - Technische Mechanik

Language

German