307.426 Technical Drawing/CAD This course is in all assigned curricula part of the STEOP.
This course is in all assigned curricula part of the STEOP.
This course is in at least 1 assigned curriculum part of the STEOP.

2022W, VU, 2.0h, 2.0EC
TUWEL

Properties

  • Semester hours: 2.0
  • Credits: 2.0
  • Type: VU Lecture and Exercise
  • Format: Hybrid

Learning outcomes

After successful completion of the course, students are able to create technical drawings of general machine components according to the technical drawing standards and rules for production-oriented design.

Subject of course

During some lectures it will be tought, how workshop drawings have to be worked out in two dimensions based on geometry of the threedimensional space and according to standards. During exercise lessons simple workshop drawings have to be worked out, by free hand, with auxiliary tools and by CAD.

Teaching methods

Arranging the rules for standard-compliant drawing creation in a short lecture section, creating freehand sketches of machine components as well as CAD drawings (parts and assembly drawings) in the exercise section.

Mode of examination

Immanent

Additional information

Graduates of a HTL (mechanical engineering or similar orientation) can attend the shortened exercise section, see dates HTL groups. To do this, you have to upload your school-leaving certificate including the timetable in TUWEL. Graduates of an AHS (general high school) have exercise once a week throughout the semester, see dates for AHS groups.

It is required to use the TUWEL online-course as there is lots of necessary information, videos, tests and much more. (available from October)

TUWEL online-course for graduates of an AHS

TUWEL online-course for graduates of a HTL

If you're in a vulnerable group, you can join the distance-learning-group. Therefore it is necessary that you send a mail with a short explanation to klaus.decker@tuwien.ac.at till 3rd October 2022.

Lecturers

Institute

Examination modalities

Ongoing assessment, assessment of finished drawings, short examination.

Group dates

GroupDayTimeDateLocationDescription
AHS 1Tue12:00 - 14:0011.10.2022 - 24.01.2023CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 1
AHS 2Tue12:00 - 14:0011.10.2022 - 24.01.2023CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 2
AHS 3Tue12:00 - 14:0011.10.2022 - 24.01.2023CAD-Labor Saal 3 307.426 Technical Drawing/CAD AHS 3
AHS 4Tue15:00 - 17:0011.10.2022 - 24.01.2023CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 4
AHS 5Tue15:00 - 17:0011.10.2022 - 24.01.2023CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 5
AHS 6Tue15:00 - 17:0011.10.2022 - 24.01.2023CAD-Labor Saal 3 307.426 Technical Drawing/CAD AHS 6
AHS 7Wed14:00 - 16:0012.10.2022 - 25.01.2023CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 7
AHS 8Wed14:00 - 16:0012.10.2022 - 25.01.2023CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 8
AHS 9Wed14:00 - 16:0012.10.2022 - 25.01.2023CAD-Labor Saal 3 307.426 Technical Drawing/CAD AHS 9
AHS 10Thu14:00 - 16:0013.10.2022 - 26.01.2023CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 10
AHS 11Thu14:00 - 16:0013.10.2022 - 26.01.2023CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 11
AHS 12Thu14:00 - 16:0013.10.2022 - 26.01.2023CAD-Labor Saal 3 307.426 Technical Drawing/CAD AHS 12
AHS 13Fri13:00 - 15:0014.10.2022 - 20.01.2023CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 13
AHS 14Fri13:00 - 15:0014.10.2022 - 20.01.2023CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD AHS 14
AHS 15Fri13:00 - 15:0014.10.2022 - 20.01.2023CAD-Labor Saal 3 307.426 Technical Drawing/CAD AHS 15
Distance Learning (für Risikogruppen)Thu14:00 - 16:0006.10.2022 - 26.01.2023 307.426 VU Technical Drawing/CAD - Distance Learning (für Risikogruppen)
HTL 1Wed14:00 - 16:0007.12.2022CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD HTL 1 Kolloquium
HTL 2Wed14:00 - 16:0007.12.2022CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD HTL 2 Kolloquium
HTL 3Wed14:00 - 16:0007.12.2022CAD-Labor Saal 3 307.426 Technical Drawing/CAD HTL 3 Kolloquium
HTL 4Wed16:00 - 18:0007.12.2022CAD-Labor Saal 3 307.426 Technical Drawing/CAD HTL 4 Kolloquium
HTL 5Tue12:00 - 14:0020.12.2022CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD HTL 5 Kolloquium
HTL 6Tue12:00 - 14:0020.12.2022CAD-Labor Saal 3 307.426 Technical Drawing/CAD HTL 6 Kolloquium
VT AHS 1Mon14:00 - 16:0010.10.2022 - 23.01.2023CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD VT AHS 1
VT AHS 1Mon14:00 - 16:0014.11.2022CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD VT AHS 1
VT AHS 2Mon14:00 - 16:0010.10.2022 - 23.01.2023CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD VT AHS 2
VT AHS 2Mon14:00 - 16:0014.11.2022CAD-Labor Saal 1 und 2 307.426 Technical Drawing/CAD VT AHS 2
VT AHS 3Mon14:00 - 16:0010.10.2022 - 23.01.2023CAD-Labor Saal 3 307.426 Technical Drawing/CAD VT AHS 3

Course registration

Begin End Deregistration end
01.09.2022 08:00 31.10.2022 08:01

Registration modalities

Please also register for the desired exercise group.

Group Registration

GroupRegistration FromTo
AHS 126.09.2022 13:0009.10.2022 22:59
AHS 226.09.2022 13:0009.10.2022 23:59
AHS 326.09.2022 13:0009.10.2022 22:59
AHS 426.09.2022 13:0009.10.2022 22:59
AHS 526.09.2022 13:0009.10.2022 22:59
AHS 626.09.2022 13:0009.10.2022 23:59
AHS 726.09.2022 13:0009.10.2022 23:59
AHS 826.09.2022 13:0009.10.2022 23:59
AHS 926.09.2022 13:0009.10.2022 23:59
AHS 1026.09.2022 13:0009.10.2022 23:59
AHS 1126.09.2022 13:0009.10.2022 23:59
AHS 1226.09.2022 13:0009.10.2022 23:59
AHS 1326.09.2022 13:0009.10.2022 23:59
AHS 1426.09.2022 13:0009.10.2022 23:59
AHS 1526.09.2022 13:0009.10.2022 23:59
Distance Learning (für Risikogruppen)26.09.2022 13:0009.10.2022 23:59
HTL 126.09.2022 13:0009.10.2022 23:59
HTL 226.09.2022 13:0009.10.2022 23:59
HTL 326.09.2022 13:0009.10.2022 23:59
HTL 426.09.2022 13:0009.10.2022 23:59
HTL 526.09.2022 13:0009.10.2022 23:59
HTL 626.09.2022 13:0009.10.2022 23:59
VT AHS 126.09.2022 13:0009.10.2022 23:59
VT AHS 226.09.2022 00:0009.10.2022 23:59
VT AHS 326.09.2022 00:0009.10.2022 23:59

Curricula

Study CodeSemesterPrecon.Info
033 245 Mechanical Engineering 1. Semestertrue
Course belongs to the introductory and orientation phase ("Studieneingangs- und Orientierungsphase")
033 273 Chemical and Process Engineering 1. Semestertrue
Course belongs to the introductory and orientation phase ("Studieneingangs- und Orientierungsphase")
033 282 Mechanical Engineering - Management 1. Semestertrue
Course belongs to the introductory and orientation phase ("Studieneingangs- und Orientierungsphase")

Literature

Lecture notes are available for the price of EUR 12,-. They will be sold  in the first two exercise units of all exercise groups.

Please bring the amount of money (EUR 12,-) as exactly as possible.

Otherwise please send an email to sek@ikl.tuwien.ac.at to get your date and time for the purchase at our office.

There is also the possibility of receiving the lecture notes via postal sevice, please send an email to sek@ikl.tuwien.ac.at for more information.

Frischherz, Piegler, Semrad: "Technisches Zeichnen, Fachzeichnen", Verlag Jugend & Volk.

Language

German